NO HOT WATER? Follow These Very Easy Tips

Call Today

Are you currently interested in resources concerning What Would Cause My Electric Water Heater to Stop Working??



Several modern houses take advantage of an electric water heater for their furnace, due to its benefit as well as convenience of use. However, much like any other electric devices, problems may develop with its use, unexpectedly. It can be really aggravating to awaken to a cool shower instead of a hot one or having your bath with water that isn't warm enough and even as well warm. Whatever the instance may be, water heater problems can be rather stressful. Luckily, we have actually made a checklist of possible solutions to your water heater problems. There are a variety of aspects that might create many of these problems, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for security. Whatever the issue is, getting it repaired must not present excessive of a problem if you comply with these actions:

Call A Specialist:


If after changing all malfunctioning components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a specialist viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it might be undersized for the quantity of warm water needed in your home. Whatever the case may be, a specialist plumber would certainly help solve the problem.

Examine Your Power Supply:


As standard as this might appear, it is extremely required. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely transform it off and on again. Change any kind of busted or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's currently functioning.

Check Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you may need to examine the temperature setups on your top thermostat. Guarantee the circuit breaker is turned off before doing anything. Open the accessibility panel as well as press the red button for temperature level reset over the thermostat. This ought to aid warm the water. Turn the breaker back on and also inspect if the problem has actually been fixed.

Check the Burner in the Water Heater:


If it's not a power trouble, after that try looking into your heating element if it is still working. Examine each of your heating elements to ensure the issue isn't with any of them. If any one of them is defective, change that part and then inspect whether the hot water is back on.

Verdict


Water heater troubles are not always significant. A number of them are due to small issues like a blown fuse or damaged heating element. Changing the faulty components should suffice. However, if you are still incapable to solve the trouble, give a call to your nearest plumber ahead to get it fixed.


Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/


How to Troubleshoot and Repair an Electric Water Heater

As a person who reads on Hot Water Heater Repair, I thought sharing that short article was worth the trouble. Enjoyed our post? Please share it. Help others check it out. Thanks for your time. Visit again soon.




Schedule Today!

Leave a Reply

Your email address will not be published. Required fields are marked *